Name                                            Last modified      Size  Description
 Parent Directory                                                     -   
 README                                          1994-08-04 02:00   19K  
 mxedit.2.3.1.tar.Z                              1994-03-08 01:00  323K  
 mxedit.2.4.tar.Z                                1994-08-04 02:00  346K  

README for the mxedit distribution, version 2.4
Last updated: Thu Aug  4 16:32:22 PDT 1994
Maintainter: Brent Welch, [email protected]

This code is derived from the original mx editor by John Ousterhout
and is subject to Copyright by the Regents of the University of California.

Thanks to Xerox-PARC for hosting this work.

**************** VERSION REQUIREMENTS *****************

Version 0.1 of the mxedit widget was developed with Tcl6.2 and Tk1.4
Version 1.1 has rolled forward to Tcl6.3 and Tk2.1
Version 1.2 still uses Tcl6.3 and Tk2.1
Version 1.3 uses Tcl6.4 and Tk2.3, but for no crucial reasons
Version 2.0 uses Tcl6.7 and Tk3.2
Version 2.1 uses Tcl6.7 and Tk3.2, and can use tcl-debug-1.0
Version 2.2 uses Tcl7.0 and Tk3.3
Version 2.3 uses Tcl7.3 and Tk3.6
Version 2.4 uses Tcl7.3 and Tk3.6

**************** THINGS TO READ **************

README - a quick overview
mxedit.l - a manual page
lib/mxedit.tutorial - a tutorial about the editor application

The HISTORY section below to see what changed in this release.

**************** QUICK START *****************

./configure
make

This editor depends on TCL and TK being installed at your site.  The
version requirements are listed below.  Instead of bundling these
libraries with mxedit, I encourage you to fetch them via anonymous ftp
from sprite.Berkeley.EDU under the tcl directory.

Specific dependencies on these libraries are the libtcl.a and libtk.a
(or shared library versions), include files, including
tk.in (and tkInt.h for tkReregWin.c) from TK, and tcl.h from TCL, and
associated TCL scripts, including init.tcl from TCL and
{button,entry,menu,tk}.tcl from TK.

Some folks have had trouble linking against an extended TCL library.
Let me know if it works for you, but I do not do this myself.

The GNU autoconf facility is used to create the Makefile.
The master template is Makefile.in, which you may need to tweak.
There is also configure.in, but you probably do not need to tweak that.
Assuming you have TCL and TK installed, then run the configure script
and go for the compile.

Scripts are found via the TCL auto_load facility.  This is bootstrapped
inside the mxedit.tk script (described more below) by
    source [info library]/init.tcl
    source $tk_library/tk.tcl
    set auto_path "$auto_path $mxLibrary"
Thus three library directories of scripts are assumed:
    [info library] comes from the libtcl.a implementation of "info"
    $tk_library comes from libtk.a and is initialized as a side
	effect of Tk_CreateMainWindow.
    $mxLibrary comes from mxedit.
All of these are ultimately set by the Makefiles for their
respective packages.  Assuming you have TCL and TK installed ok,
you should expect [info library] and $tk_library to be defined right.

Finally, compile the thing and try it out with:
mxedit -libDir ./lib

Installation involves putting the mxedit and dbmDump binaries into
a bin directory, and copying the scripts into a library directory.
The Makefile has an install production that attempts to "do the right thing".
If it fails, the key thing to get right is the library directory and
the tclIndex file that it contains.  The library diretory should match
the MX_LIBRARY directory as specified by the Makefile.  The tclIndex
file is created automatically by running some wish commands.  This
uses the MakeTclIndex script that should get installed into
the library directory and then executed.  If this fails, you can
get started by copying the tclIndex file that comes in the tar file.

Send mail to [email protected] and let me know how it goes.


**************** THE EDITOR ***************************

mxedit is an editor application composed around an mxedit widget.  This
depends on a bunch of TCL/TK code to organize other widgets around the
central file editing window. The routines in mxOpen.c are used to get a
new main window and interpreter context for each open file.  It is
possible to have multiple windows open at once, on the same or
different files.  The code in mxOpen.c knows about one script:

    $mxLibrary/mail.tcl

mxLibrary is set, in order of preference:
    To a compiled in value defined in the Makefile by MX_LIBRARY
    To a value from the command line option "-libDir pathname"
    To the value of the MXEDIT_LIB environment variable
    To "."
The mxedit.tk script sets things up for auto_loading the rest
of the mxedit procedures defined in the other scripts.  Make sure
there is a good tclIndex file in the mxLibrary; one comes in the tar file.

After sourcing this script, the code evals one TCL command
to initialize a window:
    mxInit font geometry file1 file2 ...
Zero or more file arguments can be passed to mxInit, but it currently
demands font (e.g., times12) and geometry (e.g., 80x25) arguments.
If no file is passed to mxInit then it opens up the  mxedit.tutorial file.
If more than one file is passed, then mxOpen (described below) is used
recursively to open more main windows.

**************** THE SCRIPTS *****************

The main script is mail.tcl.  This composes the mxedit widget with other
things like a scrollbar, menubar, command entry, and feedback widget.
This script relies on a number of other scripts:
    aliases.tcl		Short names for mxFoo commands
    basic.tcl		Simple layer above raw TK widgets
    bindings.tcl	Keystroke bindings
    colors.tk		color definitions that can be used by basic.tcl
    command.tcl		Command subwindow
    core.tcl		Wrappers around core widget functions
    dirbrowser.tcl	Directory browser
    emacs.tcl		Emacs-style key bindings
    eval.tcl		TCL eval environment
    file.tcl		File operations
    global.tcl		State for a per-process TCL interpreter
    local.tcl		Local keybindings
    menus.tcl		Menu definitinos
    mh.tcl		Interface to exmh, an MH mail reader
    search.tcl		Search and replace
    setup.tcl		UI to the keystroke bindings in mxedit
    utils.tcl		Editing TCL procs

The $mxLibrary directory is searched for these scripts
via the regular TCL auto_load facility.

Per-user customization is done via the file ~/.mxedit
This script is sourced early in mxedit.tk to give users a chance
to set some controlling global variables.  This file can also
define a proc called "mxUserOpenHook" that is invoked *after*
a window has been set up.  This is a reasonable place to adjust
keystroke and menu bindings.  A sample .mxedit file is included.

**************** MX HERITAGE ****************

Ousterhout wrote mx, and editor, and tx, a terminal emulator, in the days
of X10.  He used a simple toolkit called SX that provided menus and scrollbars.
He soon invented TCL and retrofited that into mx and tx.  However, SX had
its own selection mechanism that pre-dated ICCCM, so cut-and-paste
interoperability with xterms and the like was not possible.

I took the mx code and modified it to be a TK widget. The bulk of the
editor's mechanisms were left alone.  This includes text management,
a very nice Undo/Recovery log, search and replace, and power scrolling.

The file "tutorial1" is from the original editor and provides a
good introduction to the features of the editor.  If you run the
editor with no arguments, it opens a window on this file.  I updated
this file to reflect changes in mxedit, plus I added a section at
the end about customizing mxedit.

**************** HISTORY ********************

Version 2.4

Picked various enhancements from Mike Nelson ([email protected])

Version 2.3

Ported to TCL 7.3 and TK 3.6
Using GNU autoconf
Added config.in and Makefile.in


Version 2.2

Ported to TCL 7.0 and TK 3.3

Version 2.1.2

Fixed mxGlobal.c to call Tcl_Eval with a mutable string.
Fixed mxManager.c to make the log database world writable.
mxedit.bindings: cleaned up with respect to mouse bindings.
    Changing binding sets now *clears* all old mouse-related bindings.
    The various mouse binding procs are now simpler.
    <Escape>r in the replace window does global search and replace.
    This feature is only documented right here...
mxedit.menus: has new mxMenuUnBindAll.  Added "Openwin" entries
    to Help menu mouse binding setup.
mxedit.tk: changed to enforce clearing of binding sets before
    installing new sets.
mxedit.bindings: use mxScan{Mark,Dragto,Done} to do a better job scrolling
    with click-to-type window managers.  (olwm reorders events
    so a motion event arives before the keypress event.)
    Changed mxExchDotMark binding from <Shift-space> to <Mod1-space>
mxedit.utils: added mxScan{Mark,Dragto,Done}.
    added catch to mxExchDotMark
    added mx{Show,Hide}GlobalWindow
mxedit.mh: looks around harder for the exmh interpreter
mxedit.emacs: Minor cleanup
mxedit.global: if mxNoGlobalWindow is set in your ~/.mxedit,
    the file list window is suppressed.

Version 2.1.1

Fixed some calls to Tcl_SetResult that had bogus free proc args.

Version 2.1

Added a per-process TCL interpreter to hold a stack of kill buffers
modeled loosely after the emacs kill ring.  This interpreter also
implements a small info window that currently just records the set of
files being edited by this mxedit process.  (Recall that there is a
different TCL interpreter for each window, so this "global" interpreter
is used for any global state.)  The TCL command mxGlobalEval will
evalutate something in the context of this global interpreter.  You can
also "send" mxOpen commands to the global interpreter.

Added the ability to set the selection via keyboard commands.
<Control-space> starts a selection, after which any keyboard
motion commands (e.g., <Control-l> to move right) will
extend the selection.  The mxExchDotMark command will swap
the anchor point of the selection (a-la emacs mark) and
the caret (a-la emacs dot).  By default this is bound to
<Shift-space>, but I'm not sure that I like this binding.

Binding sets.  Started a crude way to offer different sets
of bindings.  Currently there are three types,
keys, selection, and scrolling, and two choices for each.
These choices are reflected by entries under the Help
menu.  There are also variables that you can set in
your .mxedit file to choose a particular set.

Nuked the explicit key bindings from all the ascii characters
to a simple binding from <Any-Key> to {%W insert %A}.

lib/mxedit.contrib has some scripts that were contributed but
that I have not had time to test or otherwise fold in properly.

Version 2.0

Upgraded to Tk 3.2 and Tcl 6.7

Lots of changes, basically, but mostly cosmetic.  As a user most of
the changes will be transparent.  If you have written any TCL code
to interact with the editor you'll have to pay attention to
the next item.

Virtually all the global variables and command procedures have
been named consistently with an "mx" prefix and use capitalization
on word boundaries.  Thus the "save" proc is now "mxSave", and
the "indent" global variable is now "mxIndent".  Most importantly,
the "mxeditLibrary" and "mxeditVersion" variables are now
"mxLibrary" and "mxVersion", respectively.  (The global variable that
records the identity of the mxedit widget is still "mxedit".)

The library routines in mxedit.aliases violate the naming convention
by defining more user-friendly commands like "save" and "quit".
I want to concentrate all the non-standard names, and define them
in terms of standard names, to ease integration with other TCL packages.

All the utilities in utils.tk keep a list of font'ed widgets in
FontWidgets and this list of widgets is used when changing
the font of the aplication dynamically - all widgets change.
There is an associated Font menu, mxFont command, and mxFont
global variable.

The color schemes defined in colors.tk have changed a bit.
I've gone away from dark backgrounds on the advice of folks with taste.

The status (or feedback) widget now defaults to living at the top
of the window.  You can control the placement of this widget by
setting the mxFeedback variable to "top" or "bottom".

Middle click now does scroll dragging.  The default is unaccellerated,
that is, one-to-one scrolling.  Shift middle drags faster.

It is now harder to make selections in the command and
search windows in order to avoid stealing the selection from
the main editing window.  You have to left-then-right
click to make a selection in these windows.

Added support for an MH front end that I use to read my mail.
Bug me and I'll release exmh.

Added a primitive Tcl Eval mode in which the results of
TCL expressions are displayed in another mxedit window.

The dialog boxes have been redone a bit.  The error situations
that arise during startup have been exposed as dialog boxes (finally)
so you can chose whether or not to recover from an editor log.

The MxMouseProc routine has been eliminated and the widget
selection command has been beefed up so now all selection-related
mouse actions are installed by binding actions. The default
behavior is still the same.  The Help menu provides an
entry that swaps in "motif mouse bindings" in which the
left button drags out the selection.

The Redo function has been fixed so that it properly handles
input strings that contain special TCL characters.  Previously
if you inserted something like "[date]" and then tried to
redo that, you'd get an error.

Version 1.3

This is primarily bug fixes over 1.2.  I've used Purify to plug
some core leaks and find some places during window destruction
where free data structures are referenced, including one
write operation that crashed mxedit on AIX.

Added a man page.  Some of the global variable names have been
changed to be a bit more consistent, and these are listed
in the manual.  In particular, "mxedit_library" is "mxeditLibrary".

Patched main.c to copy its argv and to be more careful
in its call to Tcl_Merge.  

Replaced the globals "mxScrollLeft" and "mxScrollRight" with a
single global "mxScroll" that can take on values {left, right, none}

Fixed up mxedit.local so that bindings are done via a procedure
that is called at the right time.  This had been broken by
the switch over to auto_loading.  Fixed the binding for "Again".

A bug that shows up in Click-to-type worlds where clicking always
caused a scroll action has been fixed.  As part of this, I removed
the "power scroll" feature that emulated Mac continuous scrolling
when you dragged out of the window.

The File menu has Cut, Copy, and Delete commands that match what
a Mac user would expect.  mxedit (and TK) deal mainly with the
X Primary selection.  The Cut and Copy commands also put the
current selection in the X Cutbuffer to deal with older programs.

Bugs in the calls to string match in mxedit.tk were fixed up.  Two
bugs conspired to mask each other, unless there were non-mxedit
TK applications running. (Don't ask...)

Still undone is support of the X Clipboard selection so that mxedit
will interoperate better with things like the SunOS DeskSet applications
that only understand how to paste from the Clipboard.  A quick hack
did not suffice, and I'm not sure how hard a more general fix will be.

Also undone is a way to direct the current selection into a Unix
process and replace it with the result.

The dialog boxes are still very primitive also.

Version 1.2

This cleans up some lint and other objections raised by gcc.
Thanks for all the feedback on this.

The editor scripts are now organized in their own directory,
plus the standard TCL auto_load capabilities are used instead
of sourcing all of the scripts at startup.

A directory browser is available under the File menu.
Thanks go to David S. Herron <[email protected]>

Power-scrolling has been augmented so that if you shift-drag the mouse
out of the window you get a continuous scroll a la the Mac.

The editor keeps track of different editing sessions and attempts
to avoid conflicting editing sessions.  When you start up an mxedit
process it checks the registered set of mxedit applications.  If it
finds a different mxedit process that is editing the same file it
will send the other process a command to display itself, and then
terminate (or go on to the next file).  This does not yet work
between machines, but it does work among different screens controlled
by the same server if you patch tkSend.c and replace all occurences of
DefaultRootWindow(dispPtr->display)
with
RootWindow(dispPtr->display, 0)
This patch ensures a single InterpRegistry property on screen 0 and allows
send to work between screens.

A simple database of editting sessions is maintained in
a dbm file, ~/.mxdb.{pag,dir}.  The contents of this database
are displayed by selecting the "Show session database" entry
under the Help menu.
An adjuct program, dbmDump, is used to print out the contents
of the per-user (~/.mxdb) or per-system registry of edit sessions.

Version 1.1 - Source release at last!

utils.tk and mxedit.bindings add some procs and class bindings for
Entry that makes them behave a bit more like the mxedit window.

Various minor fixes for other things.

There is still an occasional error when exiting a window
on the tutorial.  Something is trying to execute the name of
the application, so you get:
Bad window path name "tutorial" ...
Perhaps this is a glitch in the quitdialog.

The most significant thing still not right is that error log recovery
is automatic.  The old mx used to pop up dialog boxes while creating
the window if various conditions we not met during recovery.  This
is not convenient to do, so for now I just punt and always try to
recover from an existing log.

Outright bugs are that when copying a selection that includes backslashes,
these get interpreted before insertion.  More TCL quoting madness.
Similarly, Redo sometimes breaks because of a similar problem.

Warning - I still want to do more clean up in terms of giving all
the internal procedures consistent names, but I'm torn between
the current convenience of commands like "save" vs. a long range
approach that would be more modular and conflict less with future
extensions.  Similarly for global variables like "file" and "lines".

Version 1.03
Quite a few small bug fixes that should eliminate most error popups.
Bugs in search/replace that caused a seg fault are now gone.
A first pass at emacs-style bindings have been added - put the
command "emacsBindings" into your .mxedit file to get these

Version 1.02
This adds the use of the TCL_LIB environment variable in addition
to the [info library] TCL call for those sites that do not relink
mxedit against their own TCL library.

Version 1.01
This adds the Help menu with the popups for Key bindings etc.

Version 1.0 - Released July 1, 1992

The initial release includes a working text widget that supports file
access, an undo/recovery log, variable-width fonts (but just one at a time),
and "power scrolling".  Press the shift key and drag the text up or down
with the left or right mouse button.

Known bugs (1.0):

When running under TWM and focus-folows-mouse mode,
the insertion caret is not displayed until you click in a window
even though typing keystrokes will insert characters.

Occasionally an "open" command fails when issued to the
command subwindow because, I think, the command string gets
corrupted somewhere.  In this case a bunch of error notifiers
pop up and the editing window is as small as possible and
not immediately resizeable.

I have not put together an emacs-style set of bindings nor
a menu that slams in a new set of keybinding, but I want to.